MultitecPublished family designation. Full size, stages or impeller, seal and motor code requires selection.
Enquire with this reference →
KSB · Product family
KSB Multistage ring-section centrifugal pump Multitec for Water supply, filtration and pressure boosting
A multistage centrifugal family with horizontal or vertical arrangements. The selection can include different inlet layouts and coupling arrangements to match the installation.
Published nominal diameter rangeDN 32–250
Maximum family flow1,500 m³/h
Maximum family head1,000 m
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published family envelope. Maximum flow, head and temperature do not describe a simultaneous duty point.
| Parameter | Published reference |
|---|---|
| Published nominal diameter range | DN 32–250 |
| Maximum family flow | 1,500 m³/h |
| Maximum family head | 1,000 m |
| Maximum published pressure | 100 bar |
| Published liquid temperature | −10 to 200 °C |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
Materials & performance
Construction, hydraulic and seal materials are selected for the fluid and complete execution; the overview does not define one universal material set.
Specify flow, total head, suction conditions and the installation orientation. Verify the number of stages, materials, driver and sealing for the selected build.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Water supply, filtration and pressure boosting
- Power-station, reverse-osmosis and industrial washing duties
Compatible parts & service
Identify seals, bearings, wear components and the hydraulic assembly from the serial-number-specific parts list. Wastewater versions additionally require the correct impeller and motor configuration.
Send the full nameplate and required drawing positions. A dimensional size alone does not determine the complete repair set.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for Multitec
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
Multitec: how to read the operating range
Published nominal diameter range: DN 32–250; Maximum family flow: 1,500 m³/h; Maximum family head: 1,000 m; Maximum published pressure: 100 bar. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
Multitec: model and configuration checklist
Identification references include Multitec. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
Multitec: materials and suitable duties
Construction, hydraulic and seal materials are selected for the fluid and complete execution; the overview does not define one universal material set. Typical duties to review include Water supply, filtration and pressure boosting, Power-station, reverse-osmosis and industrial washing duties. Specify flow, total head, suction conditions and the installation orientation. Verify the number of stages, materials, driver and sealing for the selected build.
SERVICE PLANNING
Multitec: maintenance and spare-parts preparation
Identify seals, bearings, wear components and the hydraulic assembly from the serial-number-specific parts list. Wastewater versions additionally require the correct impeller and motor configuration. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about KSB Multitec
Use these answers to prepare a technically complete comparison and enquiry.
How should KSB Multitec be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for MultitecRelated KSB products
View the brand collection →
KSB · Product family
KSB In-line centrifugal pump Etaline for Heating, cooling and air-conditioning circulation
In-line centrifugal pump
A single-stage in-line pump family for building and industrial circulation. Its suction and discharge arrangement supports installations where an in-line layout is preferred.
- Published nominal diameter range
- DN 32–200
- Maximum family flow
- 700 m³/h
KSB · Product family
KSB End-suction centrifugal pump Etanorm for Water supply and compatible utility transfer
End-suction centrifugal pump
A standardised single-stage pump family with a back pull-out arrangement. The hydraulic and dimensional basis supports water and compatible industrial-liquid duties.
- Published nominal diameter range
- DN 25–150
- Maximum family flow
- 1,930 m³/h
KSB · Product family
KSB Chemical-process centrifugal pump MegaCPK for Chemical and petrochemical transfer
Chemical-process centrifugal pump
A horizontal chemical-process pump family with a radially split casing and back pull-out design. Material and seal variants allow the configuration to follow the specific chemical duty.
- Published nominal diameter range
- DN 25–250
- Maximum family flow
- 3,300 m³/h
KSB · Product family
KSB Submersible wastewater pump Amarex KRT for Untreated wastewater containing fibres or solids
Submersible wastewater pump
A submersible motor-pump family with installation and impeller choices for wastewater service. The impeller selection depends on solids, fibres and the required hydraulic duty.
- Published nominal diameter range
- DN 40–700
- Maximum family flow
- 10,080 m³/h
KSB · Product family
KSB Vertical multistage centrifugal pump Movitec for Water treatment and pressure boosting
Vertical multistage centrifugal pump
A vertical high-pressure pump family with in-line suction and discharge connections. Stage selection and motor sizing allow the configuration to follow pressure-boosting and recirculation requirements.
- Published nominal diameter range
- DN 25–125
- Maximum family flow
- 160 m³/h
MORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
U-FLO · Pumping system
U-FLO Cabinet Type Smart Noiseless Integrated Water Supply Equipment Cabinet for Secondary pressurization for high-rise buildings
Cabinet Type Smart Noiseless Integrated Water Supply Equipment
Cabinet is documented as a cabinet type smart noiseless integrated water supply equipment system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 100m3/h
- Maximum family head
- up to 135m
U-FLO · Product family
U-FLO Vertical Single-Stage Pipeline Pump FG for HVAC hot and cold water circulation
Vertical Single-Stage Pipeline Pump
FG is documented as a vertical single-stage pipeline pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 500m3/h
- Maximum family head
- up to 140m
U-FLO · Product family
U-FLO Horizontal Single-Stage End Suction Pump FH & FHC for Liquid delivery / air conditioning system
Horizontal Single-Stage End Suction Pump
FH & FHC is documented as a horizontal single-stage end suction pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1900m3/h
- Maximum family head
- up to 260m
U-FLO · Product family
U-FLO Single-Stage Double-Suction Centrifugal Pump FS for Liquid delivery / water plant
Single-Stage Double-Suction Centrifugal Pump
FS is documented as a single-stage double-suction centrifugal pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 22000m3/h
- Maximum family head
- up to 220m
U-FLO · Product family
U-FLO All Stainless Steel Fountain Pump FVP for Landscape fountain
All Stainless Steel Fountain Pump
FVP is documented as an all stainless steel fountain pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1000m3/h
- Maximum family head
- up to 555m
U-FLO · Product family
U-FLO High-Head Submersible Sewage Pump HVQ for Non-explosion-proof scenarios in the chemical, petroleum, pharmaceutical mining, paper making, cement, steel making, power generation, coal processing industries, etc
High-Head Submersible Sewage Pump
HVQ is documented as a high-head submersible sewage pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 230m3/h
- Maximum family head
- up to 800m