MegaCPKPublished family designation. Full size, stages or impeller, seal and motor code requires selection.
Enquire with this reference →
KSB · Product family
KSB MegaCPK Chemical Process Pump
A horizontal chemical-process pump family with a radially split casing and back pull-out design. Material and seal variants allow the configuration to follow the specific chemical duty.
Published nominal diameter rangeDN 25–250
Maximum family flow3,300 m³/h
Maximum family head162 m
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published 50 Hz family envelope; 60 Hz versions are separately available. Maximum flow, head and temperature do not describe a simultaneous duty point.
| Parameter | Published reference |
|---|---|
| Published nominal diameter range | DN 25–250 |
| Maximum family flow | 3,300 m³/h |
| Maximum family head | 162 m |
| Maximum published pressure | 40 bar |
| Published liquid temperature | −40 to 400 °C |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
Materials & performance
Construction, hydraulic and seal materials are selected for the fluid and complete execution; the overview does not define one universal material set.
Send liquid composition, temperature and containment requirements. Review the seal system, corrosion allowance and operating point with the selected material variant.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Chemical and petrochemical transfer
- Refinery and power-station process duties
Compatible parts & service
Identify seals, bearings, wear components and the hydraulic assembly from the serial-number-specific parts list. Wastewater versions additionally require the correct impeller and motor configuration.
Send the full nameplate and required drawing positions. A dimensional size alone does not determine the complete repair set.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for MegaCPK
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
MegaCPK: how to read the operating range
Published nominal diameter range: DN 25–250; Maximum family flow: 3,300 m³/h; Maximum family head: 162 m; Maximum published pressure: 40 bar. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
MegaCPK: model and configuration checklist
Identification references include MegaCPK. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
MegaCPK: materials and suitable duties
Construction, hydraulic and seal materials are selected for the fluid and complete execution; the overview does not define one universal material set. Typical duties to review include Chemical and petrochemical transfer, Refinery and power-station process duties. Send liquid composition, temperature and containment requirements. Review the seal system, corrosion allowance and operating point with the selected material variant.
SERVICE PLANNING
MegaCPK: maintenance and spare-parts preparation
Identify seals, bearings, wear components and the hydraulic assembly from the serial-number-specific parts list. Wastewater versions additionally require the correct impeller and motor configuration. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about KSB MegaCPK
Use these answers to prepare a technically complete comparison and enquiry.
How should KSB MegaCPK be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for MegaCPKRelated KSB products
KSB · Product family
KSB Etaline
In-line centrifugal pump
A single-stage in-line pump family for building and industrial circulation. Its suction and discharge arrangement supports installations where an in-line layout is preferred.
- Published nominal diameter range
- DN 32–200
- Maximum family flow
- 700 m³/h
KSB · Product family
KSB Etanorm
End-suction centrifugal pump
A standardised single-stage pump family with a back pull-out arrangement. The hydraulic and dimensional basis supports water and compatible industrial-liquid duties.
- Published nominal diameter range
- DN 25–150
- Maximum family flow
- 1,930 m³/h
KSB · Product family
KSB Amarex KRT
Submersible wastewater pump
A submersible motor-pump family with installation and impeller choices for wastewater service. The impeller selection depends on solids, fibres and the required hydraulic duty.
- Published nominal diameter range
- DN 40–700
- Maximum family flow
- 10,080 m³/h
KSB · Product family
KSB Movitec
Vertical multistage centrifugal pump
A vertical high-pressure pump family with in-line suction and discharge connections. Stage selection and motor sizing allow the configuration to follow pressure-boosting and recirculation requirements.
- Published nominal diameter range
- DN 25–125
- Maximum family flow
- 160 m³/h
KSB · Product family
KSB Multitec
Multistage ring-section centrifugal pump
A multistage centrifugal family with horizontal or vertical arrangements. The selection can include different inlet layouts and coupling arrangements to match the installation.
- Published nominal diameter range
- DN 32–250
- Maximum family flow
- 1,500 m³/h
MORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
CUCCHI · Product family
CUCCHI B / MG
Transfer gear pump
B and MG are traditional cast gear-pump families for industrial liquid transfer. Material variants support different fluids; the pump size and seal arrangement need to be confirmed from the individual drawing.
- Published operating pressure
- Up to 15 bar
- Capacity selection
- See the individual size curve
CUCCHI · Product family
CUCCHI FT / FM
Close-coupled gear pump
FT and FM offer compact motor-connected gear-pump arrangements for lubrication and compatible transfer duties. The construction variant determines the pressure capability and materials.
- FT cast-iron variant maximum pressure
- 5 bar
- FM cast-iron variant maximum pressure
- 10 bar
ALLWEILERNTTThermal-oil centrifugal pump
ALLWEILER · Product family
ALLWEILER NTT
Thermal-oil centrifugal pump
ALLWEILER NTT is a baseplate-mounted centrifugal pump family for circulating organic heat-transfer oil. Its thermal-barrier, bearing and shaft-seal arrangement is intended to keep serviceable components away from the highest liquid temperature.
- Maximum family flow
- 1,250 m³/h
- Maximum delivery head
- 145 m
ALLWEILERNBTClose-coupled thermal-oil centrifugal pump
ALLWEILER · Product family
ALLWEILER NBT
Close-coupled thermal-oil centrifugal pump
ALLWEILER NBT is the close-coupled member of the NTT thermal-oil family. Its compact block arrangement is used where the pump and IEC motor need a shorter installed footprint.
- Maximum family flow
- 270 m³/h
- Maximum delivery head
- 145 m
ALLWEILERTRILUB TRFThree-screw pump
ALLWEILER · Product family
ALLWEILER TRILUB TRF
Three-screw pump
ALLWEILER TRILUB TRF is a self-priming three-screw pump family for clean lubricating liquids. The screw set produces a smooth, low-pulsation flow for higher-capacity lubrication, hydraulic and light fuel-oil transfer.
- Maximum family flow
- 2,400 L/min
- Maximum inlet pressure
- 5 bar
ALLWEILERTRILUB TRLThree-screw pump
ALLWEILER · Product family
ALLWEILER TRILUB TRL
Three-screw pump
ALLWEILER TRILUB TRL is a three-screw pump family for lubricating and hydraulic oils. Its self-priming, low-pulsation pumping principle is suited to oil circulation and supply duties where steady delivery is required.
- Maximum family flow
- 880 L/min
- Maximum inlet pressure
- 3 bar