ADHESIVES • INKS • PROCESS LIQUIDS
Paper & packaging
Packaging and paper-converting lines use pumps for adhesives, inks, coatings and wash liquids. Treat these process fluids separately from bulk pulp handling, where fibres and consistency can demand different equipment.
Common transfer duties
- Supply to converting equipment
- Transfer from preparation tanks
- Colour-change and cleaning support
Selection priorities
Report viscosity at operating temperature, fibre or particle content and the risk of drying or curing. Review pulsation and cleaning requirements at the point of use.
Explore pump configurations
Examples for selection review. Model photographs are references; final suitability depends on the complete configuration and your process.
Stainless steel AODD
WILDEN XPS8
2" · Stainless Steel
Item 08-14517
A configuration to compare for the defined adhesive or coating.
View technical details →
Aluminum AODD
WILDEN PS4
1 1/2" · Aluminum
Item 04-13436
Review compatibility and the elastomer set for a dedicated process fluid.
View technical details →
Polypropylene AODD
WILDEN P2
1" · Polypropylene
Item 02-10277
A separate wash-liquid or chemical-transfer example.
View technical details →Explore other pump technologies
Documented families for the listed duties. Review the fluid and configuration before selecting.
DESMI ROTAN HD1264EFCHD-1M22BSHeavy-duty internal gear pump↗DESMI ROTAN HD1263LFCHD-1M82BHeavy-duty internal gear pump↗DESMI ROTAN HD1524LFKTR-5U22BSHeavy-duty internal gear pump↗DESMI ROTAN HD81EFR-1U22BHeavy-duty internal gear pump↗