SP10Published hydraulic model; the full material, motor and connection code is configured separately.
Enquire with this reference →FTI / Finish ThompsonSP10Self-priming magnetic-drive centrifugal pump
FTI / Finish Thompson · Model family
FTI / Finish Thompson Self-priming magnetic-drive centrifugal pump SP10 for Compatible chemical circulation and transfer
A sealless magnetic-drive centrifugal model for compatible chemical service. The self-priming arrangement is relevant when suction conditions require this function.
Suction × discharge1 × 1 in
Published flow range at 2,900 rpm0.114–12.2 m³/h
Maximum head at 2,900 rpm13.7 m
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published 2,900 rpm hydraulic range. Power values are based on specific gravity 1.0; impeller diameter and liquid properties determine the selected operating point.
| Parameter | Published reference |
|---|---|
| Suction × discharge | 1 × 1 in |
| Published flow range at 2,900 rpm | 0.114–12.2 m³/h |
| Maximum head at 2,900 rpm | 13.7 m |
| Maximum working pressure | 5.5 bar |
| Published power range at 2,900 rpm | 0.10–0.63 kW |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
Materials & performance
Select casing, impeller, bearing and O-ring materials from the model specification.
Provide duty flow and head, suction level and liquid properties. Check the curve at the intended speed and verify any minimum-flow or priming requirement.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Compatible chemical circulation and transfer
- Treatment-chemical and process utility duties
Compatible parts & service
Service items include the impeller assembly, thrust ring, bushing, shaft, O-rings, barrier and drive magnet, according to the model drawing.
Drawing callout positions are not orderable part codes. Send the serial number and actual material arrangement to identify replacement parts.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for SP10
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
SP10: how to read the operating range
Suction × discharge: 1 × 1 in; Published flow range at 2,900 rpm: 0.114–12.2 m³/h; Maximum head at 2,900 rpm: 13.7 m; Maximum working pressure: 5.5 bar. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
SP10: model and configuration checklist
Identification references include SP10. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
SP10: materials and suitable duties
Select casing, impeller, bearing and O-ring materials from the model specification. Typical duties to review include Compatible chemical circulation and transfer, Treatment-chemical and process utility duties. Provide duty flow and head, suction level and liquid properties. Check the curve at the intended speed and verify any minimum-flow or priming requirement.
SERVICE PLANNING
SP10: maintenance and spare-parts preparation
Service items include the impeller assembly, thrust ring, bushing, shaft, O-rings, barrier and drive magnet, according to the model drawing. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about FTI / Finish Thompson SP10
Use these answers to prepare a technically complete comparison and enquiry.
How should FTI / Finish Thompson SP10 be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for SP10MORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
U-FLO · Pumping system
U-FLO Mobile Smart Noiseless Integrated Water Supply Pump Room Container for Mobile Smart Noiseless Integrated Water Supply Pump Room
Mobile Smart Noiseless Integrated Water Supply Pump Room
Container is documented as a mobile smart noiseless integrated water supply pump room system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Published reference
- Confirm from the selected model and current technical sheet
U-FLO · Product family
U-FLO Vertical Single-Stage Pipeline Pump FG for HVAC hot and cold water circulation
Vertical Single-Stage Pipeline Pump
FG is documented as a vertical single-stage pipeline pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 500m3/h
- Maximum family head
- up to 140m
U-FLO · Product family
U-FLO Horizontal Single-Stage End Suction Pump FH & FHC for Liquid delivery / air conditioning system
Horizontal Single-Stage End Suction Pump
FH & FHC is documented as a horizontal single-stage end suction pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1900m3/h
- Maximum family head
- up to 260m
U-FLO · Product family
U-FLO Single-Stage Double-Suction Centrifugal Pump FS for Liquid delivery / water plant
Single-Stage Double-Suction Centrifugal Pump
FS is documented as a single-stage double-suction centrifugal pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 22000m3/h
- Maximum family head
- up to 220m
U-FLO · Product family
U-FLO Intelligent Safe-Noise Permanent Magnet Air-Conditioning Pump GPA for Cooling system
Intelligent Safe-Noise Permanent Magnet Air-Conditioning Pump
GPA is documented as an intelligent safe-noise permanent magnet air-conditioning pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1200m3/h
- Maximum family head
- up to 320m
U-FLO · Product family
U-FLO High-Head Submersible Sewage Pump HVQ for Non-explosion-proof scenarios in the chemical, petroleum, pharmaceutical mining, paper making, cement, steel making, power generation, coal processing industries, etc
High-Head Submersible Sewage Pump
HVQ is documented as a high-head submersible sewage pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 230m3/h
- Maximum family head
- up to 800m