EFPPublished tube/model family; motor, length, seals and accessories remain configuration choices.
Enquire with this reference →FTI / Finish ThompsonEFPPolypropylene drum pump
FTI / Finish Thompson · Model family
FTI / Finish Thompson Polypropylene drum pump EFP for Compatible cleaners, coolants and light chemical solutions
A lightweight drum-transfer pump for compatible liquids. The narrow tube and available immersion lengths support portable container-emptying duties.
Maximum flow — electric-drive envelope64 L/min
Maximum head — electric-drive envelope6.1 m
Maximum published viscosity300 cP
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published range for this family or model group. Maximum values are independent limits; the actual duty point depends on speed, fluid, size and configuration.
| Parameter | Published reference |
|---|---|
| Maximum flow — electric-drive envelope | 64 L/min |
| Maximum head — electric-drive envelope | 6.1 m |
| Maximum published viscosity | 300 cP |
| Published temperature range | −18 to 66 °C |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
Materials & performance
Polypropylene tube and impeller; 316 stainless-steel shaft; FKM O-ring.
Check chemical concentration and container opening. The values shown are for the electric-drive arrangement; air and 12 V variants have different envelopes.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Compatible cleaners, coolants and light chemical solutions
Compatible parts & service
Use the model, tube length, serial number and motor identification to specify the impeller or rotor, shaft, seals and other service components. HVDP assemblies also require the correct stator.
Confirm whether the requested supply includes tube, motor, hose, nozzle and connections. These components are not assumed to be included with a bare pump tube.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for EFP
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
EFP: how to read the operating range
Maximum flow — electric-drive envelope: 64 L/min; Maximum head — electric-drive envelope: 6.1 m; Maximum published viscosity: 300 cP; Published temperature range: −18 to 66 °C. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
EFP: model and configuration checklist
Identification references include EFP. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
EFP: materials and suitable duties
Polypropylene tube and impeller; 316 stainless-steel shaft; FKM O-ring. Typical duties to review include Compatible cleaners, coolants and light chemical solutions. Check chemical concentration and container opening. The values shown are for the electric-drive arrangement; air and 12 V variants have different envelopes.
SERVICE PLANNING
EFP: maintenance and spare-parts preparation
Use the model, tube length, serial number and motor identification to specify the impeller or rotor, shaft, seals and other service components. HVDP assemblies also require the correct stator. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about FTI / Finish Thompson EFP
Use these answers to prepare a technically complete comparison and enquiry.
How should FTI / Finish Thompson EFP be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for EFPMORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
U-FLO · Pumping system
U-FLO Mobile Smart Noiseless Integrated Water Supply Pump Room Container for Mobile Smart Noiseless Integrated Water Supply Pump Room
Mobile Smart Noiseless Integrated Water Supply Pump Room
Container is documented as a mobile smart noiseless integrated water supply pump room system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Published reference
- Confirm from the selected model and current technical sheet
U-FLO · Product family
U-FLO Vertical Single-Stage Pipeline Pump FG for HVAC hot and cold water circulation
Vertical Single-Stage Pipeline Pump
FG is documented as a vertical single-stage pipeline pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 500m3/h
- Maximum family head
- up to 140m
U-FLO · Product family
U-FLO Horizontal Single-Stage End Suction Pump FH & FHC for Liquid delivery / air conditioning system
Horizontal Single-Stage End Suction Pump
FH & FHC is documented as a horizontal single-stage end suction pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1900m3/h
- Maximum family head
- up to 260m
U-FLO · Product family
U-FLO Single-Stage Double-Suction Centrifugal Pump FS for Liquid delivery / water plant
Single-Stage Double-Suction Centrifugal Pump
FS is documented as a single-stage double-suction centrifugal pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 22000m3/h
- Maximum family head
- up to 220m
U-FLO · Product family
U-FLO Intelligent Safe-Noise Permanent Magnet Air-Conditioning Pump GPA for Cooling system
Intelligent Safe-Noise Permanent Magnet Air-Conditioning Pump
GPA is documented as an intelligent safe-noise permanent magnet air-conditioning pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 1200m3/h
- Maximum family head
- up to 320m
U-FLO · Product family
U-FLO High-Head Submersible Sewage Pump HVQ for Non-explosion-proof scenarios in the chemical, petroleum, pharmaceutical mining, paper making, cement, steel making, power generation, coal processing industries, etc
High-Head Submersible Sewage Pump
HVQ is documented as a high-head submersible sewage pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 230m3/h
- Maximum family head
- up to 800m