MX5Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →
CUCCHI · Product family
CUCCHI MX Gear Pump
MX provides stainless-steel gear-pump options for transferring compatible process liquids. Size-specific curves and connection arrangements support selection across small and larger transfer duties.
Published viscosity range1–100,000 cP
Mechanical-seal design temperatureUp to 200 °C; actual materials govern
Packing design temperatureUp to 300 °C; actual materials govern
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published range for this family or model group. Maximum values are independent limits; the actual duty point depends on speed, fluid, size and configuration.
| Parameter | Published reference |
|---|---|
| Published viscosity range | 1–100,000 cP |
| Mechanical-seal design temperature | Up to 200 °C; actual materials govern |
| Packing design temperature | Up to 300 °C; actual materials govern |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
MX10Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX15Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX25Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX40Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX50Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX70Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX100Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →MX150Published family, drawing or curve designation; confirm the complete order configuration.
Enquire with this reference →Materials & performance
AISI 316L standard construction; gear treatment and seal materials are application dependent.
Check for suspended solids and verify gear compatibility. Use viscosity-corrected curves and specify heating where required.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Resins, adhesives, polyols and isocyanates
- Molasses, fats or chocolate with the specified food-contact construction
Compatible parts & service
Identify gears, shafts, bushes and seals for gear pumps, or the liquid-end valves, piston seals and diaphragms for metering pumps, using the matching section drawing.
Provide the serial number, complete construction code and fluid details before a repair set is specified. Optional gear treatments, heating or magnetic drives change the required parts.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for MX
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
MX: how to read the operating range
Published viscosity range: 1–100,000 cP; Mechanical-seal design temperature: Up to 200 °C; actual materials govern; Packing design temperature: Up to 300 °C; actual materials govern. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
MX: model and configuration checklist
Identification references include MX5, MX10, MX15, MX25, MX40. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
MX: materials and suitable duties
AISI 316L standard construction; gear treatment and seal materials are application dependent. Typical duties to review include Resins, adhesives, polyols and isocyanates, Molasses, fats or chocolate with the specified food-contact construction. Check for suspended solids and verify gear compatibility. Use viscosity-corrected curves and specify heating where required.
SERVICE PLANNING
MX: maintenance and spare-parts preparation
Identify gears, shafts, bushes and seals for gear pumps, or the liquid-end valves, piston seals and diaphragms for metering pumps, using the matching section drawing. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about CUCCHI MX
Use these answers to prepare a technically complete comparison and enquiry.
How should CUCCHI MX be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for MXRelated CUCCHI products
CUCCHI · Product family
CUCCHI N
Metering gear pump
A gear-metering range for process liquids where consistent delivery and speed-based control are important. Stainless-steel bar-stock construction and selected sealing arrangements support chemical and formulation duties.
- Family flow range
- 0.5–60,000 L/h
- Maximum published operating pressure
- 15 bar
CUCCHI · Product family
CUCCHI WP
Low-viscosity metering gear pump
WP addresses metering of low-viscosity and poorly lubricating liquids. Fluid temperature and the chosen construction are particularly important for these duties.
- Published flow range
- 2–16 L/min
- Maximum pressure
- 15 bar
CUCCHI · Product family
CUCCHI S / SK / SM
Transfer gear pump
The S, SK and SM families use machined construction for liquid transfer, with controlled-speed arrangements for suitable metering duties. The selected material and seal arrangement govern chemical compatibility.
- Published viscosity range
- 1–100,000 cP
- Duty selection
- Individual size curve and motor speed required
CUCCHI · Product family
CUCCHI B / MG
Transfer gear pump
B and MG are traditional cast gear-pump families for industrial liquid transfer. Material variants support different fluids; the pump size and seal arrangement need to be confirmed from the individual drawing.
- Published operating pressure
- Up to 15 bar
- Capacity selection
- See the individual size curve
CUCCHI · Product family
CUCCHI FT / FM
Close-coupled gear pump
FT and FM offer compact motor-connected gear-pump arrangements for lubrication and compatible transfer duties. The construction variant determines the pressure capability and materials.
- FT cast-iron variant maximum pressure
- 5 bar
- FM cast-iron variant maximum pressure
- 10 bar
MORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
DESMI ROTAN · Verified full model
DESMI ROTAN CD1264EFM-3U332
Chemical-duty internal gear pump
CD1264EFM-3U332 is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 60054-KC-R. Published attached option / drive reference: 3314-060HA2MD. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN CD
- Nominal size reference
- 1264
DESMI ROTAN · Verified full model
DESMI ROTAN CD33E-3U84B
Chemical-duty internal gear pump
CD33E-3U84B is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 6886U. Published attached option / drive reference: PL21 USA NPT. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN CD
- Nominal size reference
- 33 / DN 32 / 1¼ in
DESMI ROTAN · Verified full model
DESMI ROTAN HD1264EFCHD-1M22BS
Heavy-duty internal gear pump
HD1264EFCHD-1M22BS is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 60053U. Published attached option / drive reference: W.DT USA. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN HD
- Nominal size reference
- 1264
DESMI ROTAN · Verified full model
DESMI ROTAN HD1263LFCHD-1M82B
Heavy-duty internal gear pump
HD1263LFCHD-1M82B is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 60559U. Published attached option / drive reference: W.DT USA. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN HD
- Nominal size reference
- 1263
DESMI ROTAN · Verified full model
DESMI ROTAN HD1524LFKTR-5U22BS
Heavy-duty internal gear pump
HD1524LFKTR-5U22BS is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 60733. Published attached option / drive reference: CJ/825. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN HD
- Nominal size reference
- 1524
DESMI ROTAN · Verified full model
DESMI ROTAN HD81EFR-1U22B
Heavy-duty internal gear pump
HD81EFR-1U22B is documented in an official DESMI stock/item list (Week 11, 2026). DESMI item number: 6105-R. Published attached option / drive reference: USA. DFIN preserves the original full model string for identification and quotation matching.
- Family
- ROTAN HD
- Nominal size reference
- 81 / DN 80 / 3 in