IPPSPublished U-FLO family designation. The complete size, hydraulic execution, motor, materials and accessories remain to be selected.
Enquire with this reference →
U-FLO · Pumping system
U-FLO Integrated Prefabricated Pump Station IPPS for Integrated Prefabricated Pump Station
IPPS is documented as an integrated prefabricated pump station system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
Published referenceConfirm from the selected model and current technical sheet
EXPLORE THIS PRODUCT DOSSIER
Product, engineering and service information in one place
ENGINEERING DATA
Technical specifications
Published family limits are reference maxima and do not describe one simultaneous operating point. Confirm the selected size on its current performance curve.
| Parameter | Published reference |
|---|---|
| Published reference | Confirm from the selected model and current technical sheet |
IDENTIFY THE RIGHT BUILD
Models & configuration
A family or hydraulic size is the starting reference. Include the complete nameplate designation, serial number, materials, seals, drive and connection details when ordering.
Materials & performance
Construction materials depend on the selected size and execution. Confirm casing, impeller, shaft, seal, elastomers and all wetted materials against the liquid and operating temperature.
Provide design and peak flow, static and friction head, solids and fibre content, wet-well geometry, installation type, power supply, controls, redundancy and required material execution.
DFIN reviews the operating point together with the suction condition and drive. Supply the fluid properties at both start-up and normal operation so the proposed arrangement can be checked against the appropriate curve.
Application industries
DFIN application links identify duties to discuss, subject to the specified fluid and complete pump configuration.
Typical duties to review
- Integrated Prefabricated Pump Station
Application suitability depends on the selected size, materials, motor and installation.
Compatible parts & service
Use the complete IPPS designation, equipment serial number and nameplate to identify the installed hydraulic, motor and control configuration before ordering a replacement or service part.
For service planning, record operating history and the required drawing positions. Confirm seals, bearings, wear parts, impellers, cables, sensors and control components against the actual build.
Maintenance planning
Use the selected model’s operating manual for isolation, draining, inspection and reassembly. Report leakage, unusual noise, loss of output or visible wear with photographs and the operating history. DFIN can use the equipment identity and drawing positions to prepare a parts enquiry.
Request matching service parts →DFIN KNOWLEDGE BASE
DFIN technical notes for IPPS
Shanghai Dfin Pump Co., Ltd. has reorganised the available product facts into practical notes for identification, selection, application review and maintenance planning. These notes support an initial comparison; the final duty point and order code still require project-specific confirmation.
PERFORMANCE NOTE
IPPS: how to read the operating range
Published reference: Confirm from the selected model and current technical sheet. These figures describe the documented family or model reference; the usable duty point must be checked against speed, liquid properties, suction conditions and the selected drive.
MODEL IDENTIFICATION
IPPS: model and configuration checklist
Identification references include IPPS. Use the complete nameplate designation, serial number, connection, materials, seal arrangement and drive details when requesting a replacement or quotation.
APPLICATION REVIEW
IPPS: materials and suitable duties
Construction materials depend on the selected size and execution. Confirm casing, impeller, shaft, seal, elastomers and all wetted materials against the liquid and operating temperature. Typical duties to review include Integrated Prefabricated Pump Station. Provide design and peak flow, static and friction head, solids and fibre content, wet-well geometry, installation type, power supply, controls, redundancy and required material execution.
SERVICE PLANNING
IPPS: maintenance and spare-parts preparation
Use the complete IPPS designation, equipment serial number and nameplate to identify the installed hydraulic, motor and control configuration before ordering a replacement or service part. Isolate the equipment, follow the applicable maintenance procedure and confirm every replacement item against the installed configuration before ordering.
PRODUCT & ENGINEERING FAQ
Questions about U-FLO IPPS
Use these answers to prepare a technically complete comparison and enquiry.
How should U-FLO IPPS be selected?
Start with the real duty point: fluid, flow, differential pressure or head, temperature, viscosity, solids, suction condition and operating pattern. DFIN then reviews size, materials, sealing and drive.
Are the listed maximum values a guaranteed operating point?
No. They describe independent catalog boundaries for the family or model. The selected point must be checked against the applicable curve, size, speed, fluid and drive arrangement.
What information confirms the complete model code?
Provide the full nameplate designation and serial number plus materials, seal arrangement, ports, drive, motor supply and any special option. A family name alone is not an order code.
Can DFIN help identify service parts?
Yes. Send the equipment identity, drawing position, existing part code, photographs, material and failure description. DFIN can prepare a parts enquiry matched to the installed configuration.
What should be included in the quotation request?
Include quantity, fluid data, operating point, installation, connection standard, available utilities, hazardous-area requirements and delivery destination. For a replacement, include the nameplate and current drawing.
SHANGHAI DFIN PUMP CO., LTD.
Turn this reference into a clear quotation.
Send the full model and serial number, quantity, fluid, required flow and pressure, temperature, viscosity, installation details and delivery destination. For a replacement, attach the nameplate and existing drawing.
Prepare an enquiry for IPPSRelated U-FLO products
View the brand collection →
U-FLO · Pumping system
U-FLO Small Smart Noiseless Frequency Conversion Water Supply Equipment BG.clock for Building construction pressurized water supply
Small Smart Noiseless Frequency Conversion Water Supply Equipment
BG.clock is documented as a small smart noiseless frequency conversion water supply equipment system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 7.2m3/h
- Maximum family head
- up to 65m
U-FLO · Product family
U-FLO Explosion-Proof Submerged Sewage Pump BQVQ for Applicable to explosion-proof marked products in areas with explosion-proof requirements
Explosion-Proof Submerged Sewage Pump
BQVQ is documented as an explosion-proof submerged sewage pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 3000m3/h
- Maximum family head
- up to 80m
U-FLO · Product family
U-FLO Stainless Steel Bottom Suction Submersible Pump BVP for Lake pumping
Stainless Steel Bottom Suction Submersible Pump
BVP is documented as a stainless steel bottom suction submersible pump product family. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 540m3/h
- Maximum family head
- up to 300m
U-FLO · Pumping system
U-FLO Cabinet Type Smart Noiseless Integrated Water Supply Equipment Cabinet for Secondary pressurization for high-rise buildings
Cabinet Type Smart Noiseless Integrated Water Supply Equipment
Cabinet is documented as a cabinet type smart noiseless integrated water supply equipment system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Maximum family flow
- up to 100m3/h
- Maximum family head
- up to 135m
U-FLO · Pumping system
U-FLO Mobile Smart Noiseless Integrated Water Supply Pump Room Container for Mobile Smart Noiseless Integrated Water Supply Pump Room
Mobile Smart Noiseless Integrated Water Supply Pump Room
Container is documented as a mobile smart noiseless integrated water supply pump room system. DFIN has reorganised the published performance and application facts for product comparison, duty review and quotation preparation. Final size, materials, motor, controls and accessories are confirmed against the actual installation.
- Published reference
- Confirm from the selected model and current technical sheet
MORE PRODUCTS FOR SIMILAR DUTIES
Compare other pump technologies
Cross-brand references that share one or more application pathways with this product.
DESMI ROTAN · Product family
DESMI ROTAN General-purpose internal gear pump GP for Lubricating and compatible waste oils
General-purpose internal gear pump
ROTAN GP is a compact cast-iron option for clean, non-abrasive liquid transfer. Its general-purpose construction is a starting point for oil and compatible utility-fluid duties with moderate viscosity.
- Maximum family flow
- 50 m³/h
- Maximum differential pressure
- 16 bar
DESMI ROTAN · Product family
DESMI ROTAN Magnetically coupled internal gear pump ED for Isocyanates and polyols
Magnetically coupled internal gear pump
ROTAN ED uses a magnetic coupling for duties where containment and maintenance of the shaft-seal area are central concerns. Its application range includes moisture-sensitive or otherwise demanding process liquids.
- Maximum family flow
- 90 m³/h
- Maximum differential pressure
- 16 bar
MAAG · Product family
MAAG Industrial gear pump hydrolub for Lubricating and fuel-oil circulation
Industrial gear pump
An industrial gear-pump family for lubrication and compatible transfer duties. The selected gear, seal and pressure-protection arrangement should follow the oil or process-liquid specification.
- Family flow range
- 0.1–2,400 L/min
- Maximum differential pressure
- 120 bar
CUCCHI · Product family
CUCCHI Metering gear pump N for Detergent and cosmetic ingredient dosing
Metering gear pump
A gear-metering range for process liquids where consistent delivery and speed-based control are important. Stainless-steel bar-stock construction and selected sealing arrangements support chemical and formulation duties.
- Family flow range
- 0.5–60,000 L/h
- Maximum published operating pressure
- 15 bar
CUCCHI · Product family
CUCCHI Transfer gear pump S / SK / SM for Compatible chemical transfer without suspended solids
Transfer gear pump
The S, SK and SM families use machined construction for liquid transfer, with controlled-speed arrangements for suitable metering duties. The selected material and seal arrangement govern chemical compatibility.
- Published viscosity range
- 1–100,000 cP
- Duty selection
- Individual size curve and motor speed required
CUCCHI · Product family
CUCCHI Transfer gear pump B / MG for Oil and compressor-lubrication transfer
Transfer gear pump
B and MG are traditional cast gear-pump families for industrial liquid transfer. Material variants support different fluids; the pump size and seal arrangement need to be confirmed from the individual drawing.
- Published operating pressure
- Up to 15 bar
- Capacity selection
- See the individual size curve