Home / Parts & Kits / 08-9804-51

WILDEN / Wet End Kit

WILDEN 08-9804-51 2 · Aluminum, Stainless Steel · Wet Kit

WILDEN item number 08-9804-51

Part type: Wet End Kit
Material: Aluminum, Stainless Steel
Model / configuration: 2
Part function: Wet Kit

Match the complete pump model and revision before ordering a replacement.

PRODUCT OVERVIEW

Part identification

WILDEN 08-9804-51 is identified as Wet Kit. The recorded material is Aluminum, Stainless Steel. This page is structured for part identification, maintenance planning and RFQ review.

TECHNICAL DATA

Technical parameters

WILDEN item number	08-9804-51
Model / configuration	2
Part type	Wet End Kit
Part function	Wet Kit
Material	Aluminum, Stainless Steel
Purpose / application	Wet Kit
Technical identification	Wet End Kit for 2" Original Clamped Metal with Neoprene Diaphragms
Related WILDEN item numbers	08-1010-51, 08-1080-51, 08-1120-51
Kit scope	Wet End Kit for 2" Original Clamped Metal including P8, PS8, PX8, PV8, T8 - Neoprene (NES) Diaphragms, Standard Components
Compatible models	Traditional - Pie Shaped

Compatibility and code verification

Match the complete pump model, generation, size, air distribution system, wetted material and elastomer before ordering. Similar-looking components may not be interchangeable.

Materials

Review the body, diaphragms, balls, seats, seals and process-fluid compatibility as a complete system. Do not approve a material from one component alone.

Performance

Part performance and service life depend on the correct pump generation, operating pressure, fluid compatibility, assembly condition and maintenance procedure.

Suitable operating duties

Typical duties include chemical transfer, process circulation, tank unloading, coatings, wastewater and solids-bearing fluids where an AODD pump is appropriate. Final suitability depends on the actual fluid, concentration, temperature and duty point.

Selection guidance

Provide the fluid name and concentration, temperature, viscosity, solids size, suction lift, required flow, discharge pressure, connection standard and available air pressure. For service parts, also provide the pump nameplate and the removed component code where visible.

SERVICE MATCHING

Kit contents and service relationship

WILDEN PART / KIT

08-9804-51 · Wet Kit

Wet End Kit for 2" Original Clamped Metal with Neoprene Diaphragms

3 referenced component item numbers

08-1010-51Traditional Neoprene (NES) diaphragm for 2" pumps
08-1080-51Valve Ball in Neoprene for 2" Pumps
08-1120-51Valve Seat in Neoprene for 2" Pumps

Compatible models: Traditional - Pie Shaped

Kit contents and quantities can change by pump generation, material code, special option and revision. DFIN verifies the exact item number and BOM before quotation.

Maintenance notes

Isolate and depressurize both air and fluid lines before service. Inspect diaphragms, valve balls, seats, seals, shaft and air-valve wear together. Follow the applicable WILDEN service manual for assembly sequence, lubrication and fastener torque.

DFIN TECHNICAL DECISION SUPPORT

A practical guide to 2

Use this page as a working product dossier: identify the item, review the duty, verify service relationships and prepare a complete enquiry.

Ask DFIN to verify this record

Identify the installed pump

Part 08-9804-51 should be checked against the full pump model, generation, serial number and existing component marking.

Confirm material and quantity

Similar service parts can differ by elastomer, polymer, metal grade, package quantity or pump revision. Confirm every field before ordering.

Review kit relationship

Determine whether this item is supplied individually, inside an Air End or Wet End kit, or as part of a larger assembly.

Prepare the maintenance record

Record the failure position, operating hours, fluid, pressure and photographs. This helps identify related wear items before the pump is returned to service.

COMPATIBLE PUMP REFERENCES

Pump references related to this service item

Use these records as identification leads. DFIN verifies the exact revision, material and package scope before supply.

Browse all complete pumps →

PRODUCT & SERVICE FAQ

Questions about 2

Answers for identification, selection and service planning. For a confirmed quotation, DFIN checks the complete application and configuration.

Send your item number to DFIN →

How do I verify part 08-9804-51?

Use the complete item code together with the pump model, serial number, generation and material configuration. A photograph of the removed part is helpful, but appearance alone is not sufficient.

Is this part sold individually or in a kit?

The supply scope depends on the item record and pump revision. DFIN can check whether it is individual, included in an Air End or Wet End kit, or supplied as an assembly.

Can a similar-looking part be substituted?

Not without verification. Dimensions, material, elastomer grade, valve geometry and generation can differ even when the overall appearance is similar.

What information speeds up a parts quotation?

Send the part code, pump nameplate, required quantity, material, position in the assembly, reason for replacement and delivery destination.