WILDEN / Pro-Flo X™

WILDEN XPX4/WWAAR/BNU/BN/BN/0061 04-12683 · 1,5" · Cast Iron · max. 295 L/min · Complete AODD pump

WILDEN item number 04-12683

Nominal port size: 1 1/2"
Maximum flow: 295 L/min
Wetted housing: Cast Iron
Diaphragm material: Buna-N Ultraflex

Review the complete configuration and duty point with DFIN before ordering.

PRODUCT OVERVIEW

Configuration overview

WILDEN XPX4/WWAAR/BNU/BN/BN/0061 is an air-operated double-diaphragm pump configuration organized by DFIN for accurate identification, selection and quotation. The complete code should be used because it defines pump size, wetted construction, air system, elastomers, valve components and special options.

TECHNICAL DATA

Technical parameters

WILDEN item number	04-12683
Model / configuration	XPX4/WWAAR/BNU/BN/BN/0061
Port size	1,5"
Air distribution system	Pro-Flo X™
Wetted construction	Cast Iron
Diaphragms	Buna-N Ultraflex
Valve balls	Buna-N
Valve seats	Buna-N
Outer piston	Cast Iron
Air chamber	Aluminum
Center block	Aluminum
Air valve	Brass With Oil Bottle
Maximum capacity (GPM)	77
Maximum capacity (L/min)	295
Weight (kg)	31
Air end repair kit	04-9988-11-320
Wet end repair kit	04-9806-52-212

Model and configuration explanation

The full WILDEN configuration code identifies size, body and manifold construction, center section, air distribution system, diaphragms, balls, seats and special execution. Similar model families can use different internal parts.

Materials

Review the body, diaphragms, balls, seats, seals and process-fluid compatibility as a complete system. Do not approve a material from one component alone.

Performance

Published maximum flow is a reference value. Actual capacity depends on air supply, discharge pressure, suction condition, viscosity, pipe losses and solids content.

Suitable operating duties

Typical duties include chemical transfer, process circulation, tank unloading, coatings, wastewater and solids-bearing fluids where an AODD pump is appropriate. Final suitability depends on the actual fluid, concentration, temperature and duty point.

Selection guidance

Provide the fluid name and concentration, temperature, viscosity, solids size, suction lift, required flow, discharge pressure, connection standard and available air pressure. For service parts, also provide the pump nameplate and the removed component code where visible.

SERVICE MATCHING

Compatible repair kits and spare parts

AIR END REPAIR KIT

WILDEN 04-9988-11-320

Air Repair Kit for Metal 1½"-2" Pro-Flo X (PX) Series including PX4, PX400, PX420, PX430, PX8, PX800, PX820, PX830 Clamped and Bolted Pumps with Anodized Aluminum Air Valve and Single Point Exhaust (Submersible)

6 referenced component item numbers

04-2390-52-700Wetted Path O-ring in Buna (1.859" ID × 0.139" W)
04-2621-52Isolator Gasket in Buna 1½" Turbo-Flo (T) Series Pumps
04-3502-52Muffler Plate Gasket in Buna 1½" - 3" Pro-Flo Shift (PS) Series Pumps
04-3890-03Retaining Ring for 1½" Pumps
08-3210-55-225Air Valve O-Ring in PTFE 2" Pro-Flo (P), Turbo-Flo (T) Series Pumps
04-3529-56Center Block Gasket in Hytrel 1½" - 2" Pro-Flo Shift (PS) Series Pumps

WET END REPAIR KIT

WILDEN 04-9806-52-212

Wet End Kit for 1½″ Stallion Clamped Metal including P4, PS4, PX4, PV4, T4 - Buna (BNU) Diaphragms, Standard Components

3 referenced component item numbers

04-1080-52-50Valve Ball in Buna for 1½" Stallion Pumps
04-1120-52-50Valve Seat in Buna for 1½" Pumps
04-1020-52Ultra-flex Buna (BNU) diaphragm for 1.5" pumps

Spare Parts for item 04-12683

No official item-specific component list is verified for this configuration yet.

Kit contents and quantities can change by pump generation, material code, special option and revision. DFIN verifies the exact item number and BOM before quotation.

Maintenance notes

Isolate and depressurize both air and fluid lines before service. Inspect diaphragms, valve balls, seats, seals, shaft and air-valve wear together. Follow the applicable WILDEN service manual for assembly sequence, lubrication and fastener torque.

DFIN TECHNICAL DECISION SUPPORT

A practical guide to XPX4/WWAAR/BNU/BN/BN/0061

Use this page as a working product dossier: identify the item, review the duty, verify service relationships and prepare a complete enquiry.

Ask DFIN to verify this record

Confirm the complete build

Use item 04-12683 together with the full model, nameplate and serial number. The complete code controls pump size, wetted materials, air system, elastomers and valve components.

Check the real duty point

Maximum catalog values are not a selected operating point. Confirm required flow, discharge pressure, suction lift, viscosity, temperature, solids and available air pressure.

Review all wetted materials

Assess body, manifolds, diaphragms, balls, seats and seals as one fluid path. Concentration, temperature and cleaning method can change the recommended construction.

Plan the repair package

Match Air Kit, Wet Kit and component codes to the installed revision before shutdown. DFIN can prepare a cross-checked service-parts list from the item number.

MATCHED SERVICE REFERENCES

Parts and kits linked to this product record

Use these records as identification leads. DFIN verifies the exact revision, material and package scope before supply.

Browse all parts & kits →

PRODUCT & SERVICE FAQ

Questions about XPX4/WWAAR/BNU/BN/BN/0061

Answers for identification, selection and service planning. For a confirmed quotation, DFIN checks the complete application and configuration.

Send your item number to DFIN →

How do I confirm WILDEN item 04-12683?

Send the item number, full model, serial number and a clear nameplate photograph. DFIN will compare the construction, air system, elastomers and connection details before quotation.

Are the maximum flow and pressure simultaneous?

Usually not. Maximum values define catalog boundaries. A usable operating point must be selected from the appropriate curve using the real air supply, back pressure and liquid properties.

How are Air Kit and Wet Kit codes matched?

The pump item number, generation, air system and elastomer configuration are checked together. Kit contents and quantities are confirmed for the installed revision before supply.

What should be included in an RFQ?

Provide quantity, fluid and concentration, temperature, viscosity, solids, required flow and pressure, suction condition, connection standard, available air pressure and delivery destination.