dfin88@dfinsewagepump.com+86 21 31263176Industrial pump solutions since 2012
DFIN PUMPIndustrial Pump Solutions Get a Quote
Home / Parts & Kits / 02-9815-56
WILDEN 02-9815-56 1"/A/P/FSS · Polypropylene, PVDF · Wet Kit
Source catalog image matched to this WILDEN item number. Verify configuration before ordering.

WILDEN / Wet End Repair Kit

WILDEN 02-9815-56 1"/A/P/FSS · Polypropylene, PVDF · Wet Kit

WILDEN item number 02-9815-56

Part type
Wet End Repair Kit
Material
Polypropylene, PVDF
Model / configuration
1"/A/P/FSS
Part function
Wet Kit
Ask about this configuration ↗

Match the complete pump model and revision before ordering a replacement.

PRODUCT OVERVIEW

Part identification

WILDEN 02-9815-56 is identified as Wet Kit. The recorded material is Polypropylene, PVDF. This page is structured for part identification, maintenance planning and RFQ review.

TECHNICAL DATA

Technical parameters

WILDEN item number02-9815-56
Model / configuration1"/A/P/FSS
Part typeWet End Repair Kit
Part functionWet Kit
MaterialPolypropylene, PVDF
Purpose / applicationWet Kit
Technical identificationWet End Kit for 1" Advanced Bolted Plastic with Hytrel® Diaphragms
Related WILDEN item numbers02-1010-56, 02-1085-56, 02-1220-60, 04-1300-60-500
Kit scopeWet End Kit for 1" Advanced Bolted Plastic including P200 - Hytrel® (FSS) IPD Diaphragms, Standard Components
Compatible modelsTraditional - Pie Shaped

Compatibility and code verification

Match the complete pump model, generation, size, air distribution system, wetted material and elastomer before ordering. Similar-looking components may not be interchangeable.

Materials

Review the body, diaphragms, balls, seats, seals and process-fluid compatibility as a complete system. Do not approve a material from one component alone.

Performance

Part performance and service life depend on the correct pump generation, operating pressure, fluid compatibility, assembly condition and maintenance procedure.

Suitable operating duties

Typical duties include chemical transfer, process circulation, tank unloading, coatings, wastewater and solids-bearing fluids where an AODD pump is appropriate. Final suitability depends on the actual fluid, concentration, temperature and duty point.

Selection guidance

Provide the fluid name and concentration, temperature, viscosity, solids size, suction lift, required flow, discharge pressure, connection standard and available air pressure. For service parts, also provide the pump nameplate and the removed component code where visible.

SERVICE MATCHING

Kit contents and service relationship

WILDEN PART / KIT

02-9815-56 · Wet Kit

Wet End Kit for 1" Advanced Bolted Plastic with Hytrel® Diaphragms

4 referenced component item numbers

  • 02-1010-56Traditional Hytrel® (FSS) diaphragm for 1" pumps
  • 02-1085-56Valve Ball in Hytrel for 1" Bolted Metal Pumps
  • 02-1220-60Wetted Path O-ring in Teflon Encapsulated FKM (1.859" ID × 0.139" W)
  • 04-1300-60-500Wetted Path O-ring in Teflon Encapsulated FKM (2.734" ID × 0.139" W)

Compatible models: Traditional - Pie Shaped

Kit contents and quantities can change by pump generation, material code, special option and revision. DFIN verifies the exact item number and BOM before quotation.

Maintenance notes

Isolate and depressurize both air and fluid lines before service. Inspect diaphragms, valve balls, seats, seals, shaft and air-valve wear together. Follow the applicable WILDEN service manual for assembly sequence, lubrication and fastener torque.

DFIN TECHNICAL DECISION SUPPORT

A practical guide to 1"/A/P/FSS

Use this page as a working product dossier: identify the item, review the duty, verify service relationships and prepare a complete enquiry.

Ask DFIN to verify this record
01

Identify the installed pump

Part 02-9815-56 should be checked against the full pump model, generation, serial number and existing component marking.

02

Confirm material and quantity

Similar service parts can differ by elastomer, polymer, metal grade, package quantity or pump revision. Confirm every field before ordering.

03

Review kit relationship

Determine whether this item is supplied individually, inside an Air End or Wet End kit, or as part of a larger assembly.

04

Prepare the maintenance record

Record the failure position, operating hours, fluid, pressure and photographs. This helps identify related wear items before the pump is returned to service.

PRODUCT & SERVICE FAQ

Questions about 1"/A/P/FSS

Answers for identification, selection and service planning. For a confirmed quotation, DFIN checks the complete application and configuration.

Send your item number to DFIN →
How do I verify part 02-9815-56?

Use the complete item code together with the pump model, serial number, generation and material configuration. A photograph of the removed part is helpful, but appearance alone is not sufficient.

Is this part sold individually or in a kit?

The supply scope depends on the item record and pump revision. DFIN can check whether it is individual, included in an Air End or Wet End kit, or supplied as an assembly.

Can a similar-looking part be substituted?

Not without verification. Dimensions, material, elastomer grade, valve geometry and generation can differ even when the overall appearance is similar.

What information speeds up a parts quotation?

Send the part code, pump nameplate, required quantity, material, position in the assembly, reason for replacement and delivery destination.

Contact on WeChat

DFIN Pump WeChat QR code

Scan with WeChat, or save the image and open it in WeChat.

Open QR image