Home / Parts & Kits / 01-9993-99-320

WILDEN / Air Repair Kit

WILDEN 01-9993-99-320 0.5 · · Air Kits

WILDEN item number 01-9993-99-320

Part type: Air Repair Kit
Material: Confirm by item number
Model / configuration: 0.5
Part function: Air Kits

Match the complete pump model and revision before ordering a replacement.

PRODUCT OVERVIEW

Part identification

WILDEN 01-9993-99-320 is identified as Air Kits. The recorded material is . This page is structured for part identification, maintenance planning and RFQ review.

TECHNICAL DATA

Technical parameters

WILDEN item number	01-9993-99-320
Model / configuration	0.5
Part type	Air Repair Kit
Part function	Air Kits
Purpose / application	Air Kits
Technical identification	Air Repair Kit for ½" Pro-Flo Shift (PS) Series Pumps
Related WILDEN item numbers	00-2650-03, 01-2395-52, 01-3220-55, 01-3502-56, 01-2621-56
Kit scope	Air Repair Kit for Metal ½" Pro-Flo Shift (PS) Series including PS1 Clamped Pumps With Metal Air Valve and Single Point Exhaust (Submersible)
Compatible models	Pro-Flo SHIFT

Compatibility and code verification

Match the complete pump model, generation, size, air distribution system, wetted material and elastomer before ordering. Similar-looking components may not be interchangeable.

Materials

Review the body, diaphragms, balls, seats, seals and process-fluid compatibility as a complete system. Do not approve a material from one component alone.

Performance

Part performance and service life depend on the correct pump generation, operating pressure, fluid compatibility, assembly condition and maintenance procedure.

Suitable operating duties

Typical duties include chemical transfer, process circulation, tank unloading, coatings, wastewater and solids-bearing fluids where an AODD pump is appropriate. Final suitability depends on the actual fluid, concentration, temperature and duty point.

Selection guidance

Provide the fluid name and concentration, temperature, viscosity, solids size, suction lift, required flow, discharge pressure, connection standard and available air pressure. For service parts, also provide the pump nameplate and the removed component code where visible.

SERVICE MATCHING

Kit contents and service relationship

WILDEN PART / KIT

01-9993-99-320 · Air Kits

Air Repair Kit for ½" Pro-Flo Shift (PS) Series Pumps

5 referenced component item numbers

00-2650-03Retaining Ring for ¼" Pumps
01-2395-52Wetted Path O-ring in Buna (1.362" ID x .103" W)
01-3220-55Air Valve O-Ring in PTFE ½" Pro-Flo (P), Turbo-Flo (T) Series Pumps
01-3502-56Muffler Plate Gasket in Hytrel ½" Pro-Flo Shift (PS) Series Pumps
01-2621-56Air Valve Gasket in Hytrel ½" Pro-Flo Shift (PS) Series Pumps

Compatible models: Pro-Flo SHIFT

Kit contents and quantities can change by pump generation, material code, special option and revision. DFIN verifies the exact item number and BOM before quotation.

Maintenance notes

Isolate and depressurize both air and fluid lines before service. Inspect diaphragms, valve balls, seats, seals, shaft and air-valve wear together. Follow the applicable WILDEN service manual for assembly sequence, lubrication and fastener torque.

DFIN TECHNICAL DECISION SUPPORT

A practical guide to 0.5

Use this page as a working product dossier: identify the item, review the duty, verify service relationships and prepare a complete enquiry.

Ask DFIN to verify this record

Identify the installed pump

Part 01-9993-99-320 should be checked against the full pump model, generation, serial number and existing component marking.

Confirm material and quantity

Similar service parts can differ by elastomer, polymer, metal grade, package quantity or pump revision. Confirm every field before ordering.

Review kit relationship

Determine whether this item is supplied individually, inside an Air End or Wet End kit, or as part of a larger assembly.

Prepare the maintenance record

Record the failure position, operating hours, fluid, pressure and photographs. This helps identify related wear items before the pump is returned to service.

COMPATIBLE PUMP REFERENCES

Pump references related to this service item

Use these records as identification leads. DFIN verifies the exact revision, material and package scope before supply.

Browse all complete pumps →

PRODUCT & SERVICE FAQ

Questions about 0.5

Answers for identification, selection and service planning. For a confirmed quotation, DFIN checks the complete application and configuration.

Send your item number to DFIN →

How do I verify part 01-9993-99-320?

Use the complete item code together with the pump model, serial number, generation and material configuration. A photograph of the removed part is helpful, but appearance alone is not sufficient.

Is this part sold individually or in a kit?

The supply scope depends on the item record and pump revision. DFIN can check whether it is individual, included in an Air End or Wet End kit, or supplied as an assembly.

Can a similar-looking part be substituted?

Not without verification. Dimensions, material, elastomer grade, valve geometry and generation can differ even when the overall appearance is similar.

What information speeds up a parts quotation?

Send the part code, pump nameplate, required quantity, material, position in the assembly, reason for replacement and delivery destination.