系列与配件识别指南：本页不对应一个已确认的完整订货编码。请按设备铭牌、序列号和原配件编号进一步核对。
DESMI ROTAN
DESMI ROTAN GP41EM-1U2B2 Internal Gear Pump
DESMI ROTAN GP41EM-1U2B2 Internal Gear Pump：查看已记录的型号、材质、兼容信息和供货范围，向丁菲泵业提交产品核对与询价。
咨询这款产品产品概述
DESMI ROTAN GP41EM-1U2B2 is a complete-model reference used in the DESMI ROTAN Pump Selection Users Manual as an item-number search example. DFIN publishes this page for model identification, replacement enquiries and duty review. The example designation does not by itself establish current stock or a guaranteed operating point.
Model Identification
- Series: ROTAN GP — general-purpose internal gear pump
- Hydraulic size: 41
- Nominal connection reference: DN40 / 1½ in
- Complete model reference: GP41EM-1U2B2
- Verification status: DESMI manual search example; confirm current item number and supplied configuration before ordering
Series Performance Envelope
- Maximum family flow: up to 50 m³/h
- Maximum differential pressure: up to 16 bar
- Maximum speed: up to 1,750 rpm
- Maximum viscosity: up to 7,500 cSt
- Maximum liquid temperature: up to 150 °C
These figures are independent family catalogue limits. They are not a simultaneous guaranteed duty point for every size or configuration.
Construction and Configuration
ROTAN GP uses cast-iron construction for general clean, non-abrasive liquid transfer. The complete model code identifies configuration details such as orientation, sealing, lubrication and bearing materials. Final material compatibility must be checked against the actual liquid.
典型应用
Typical GP duties include clean oils, glycol, vegetable oil, lubricating oil, compatible solvents, waste oil and other non-abrasive liquids, subject to viscosity, temperature and material-compatibility review.
Selection Information Required
For a replacement or new duty, send the complete nameplate designation, serial number if available, liquid, viscosity at start-up and operating temperature, required flow, differential pressure, suction condition, installation arrangement, motor supply and quantity.
Source and Verification
Primary reference: DESMI ROTAN Pump Selection Users Manual and DESMI ROTAN GP product documentation. DESMI notes that internal CFG numbers are not order numbers. DFIN therefore confirms the current item number / complete configuration before quotation.
申请报价
Send model GP41EM-1U2B2, quantity and application data to Shanghai Dfin Pump Co., Ltd. for configuration review and quotation.
询价时请提供
完整型号或产品编码、数量、铭牌照片、介质与温度、所需流量和压力、材质及接口要求。参考型号必须与完整制造商编码和实际配置进一步核对。